LD Systems WS1000(2)(X) - Manual (Page 5)

INTRODUCTION:
INCLUDED IN ALL
SYSTEMS:
Receiver (X)
2 AA batteries
6.3 mm jack plug cable
Power supply
Two antennas
User's manual
The WS-1000 system offers an excellent solution for users who want an advanced UHF system. With its 160
frequency bands, the WS-1000 is suitable for many applications, for example, live shows, broadcasts, meetings,
instruments, etc.
Touch buttons and LCD displays permit fast and simple setup. This manual will show you everything you need to
know in order to operate the system correctly and safely.
790.850 - 813.800 MHz
838.850 - 864.900 MHz (X-Version)
Most countries regulate the frequencies that may be used for wireless data transmission. These regulations
stipulate which devices may operate in which frequency range. This minimizes interference. To permit trouble
free operation of the system, two different frequency bands are offered. To avoid problems with RF interference,
the system is supplied with pre-set frequency groups.
If you use only one system, it should not be necessary to change the operating frequency.
If you use multiple devices at the same time, you should set each device to a different channel.
The group channel system offers optimal distribution among the frequencies when multiple systems are used
at the same time. With one frequency band, you can use up to 8 individual transmitter-receiver systems in an
installation at the same time.
5
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
IT
ALIANO
POLSKI