LD Systems WS1000(2)(X) - Manual (Page 8)

LD WS1000R RECEIVER:
FRONT PANEL:
BACK PANEL
1 INFRARED (IR) WINDOW
2 ANTENNA A RECEIVER INDICATOR
Indicator lights up to signal that Receiver A is on.
3 ANTENNA A SIGNAL STRENGTH INDICATOR
4 ANTENNA B SIGNAL STRENGTH INDICATOR
5 ANTENNA B RECEIVER INDICATOR
Indicator lights up to signal that Antenna B is on.
6 CHANNEL AUDIO INDICATOR
7 CHANNEL LCD INDICATOR
Please refer to the system settings.
1 ANTENNA CONNECTOR B
50 Ω
2 XLR OUTPUT SOCKET
3 6.3 MM OUTPUT SOCKET
8 SYNC BUTTON (ASC)
Press here to establish an infrared link
between transmitter and receiver.
9 DOWN ARROW BUTTON
Use this button to navigate the menu.
10 UP ARROW BUTTON
Use this button to navigate the menu.
11 SYSTEM SETTINGS BUTTON
Please refer to the system settings.
12 ON/OFF SWITCH
4 FINE ADJUSTMENT OF THE MUTE THRESHOLD VALUE
Fine adjustment of the mute threshold value. Generally, it should not be
necessary to change this value. It is set correctly at the factory. If, however,
you receive interference, then you can increase this threshold value by
turning the control to the right until the RF signal LED goes out.
5 AC ADAPTER CONNECTOR
6 ANTENNA CONNECTOR A 50 Ω
1
2
3 4
5
6 7
8
9
10
12
11
1
2
3
4
5
6
8
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ENGLISH
DEUTSCH
FRANCAIS
ESP
AÑOL
IT
ALIANO
POLSKI