Lynx Studio LT-TB Thunderbolt - Manual (Page 26)

26
be stored into the scene file. Selecting an existing scene name and clicking the Save button
will overwrite that scene with the current parameters.
To delete a scene simply delete the mixer scene file from the disc drive.
NOTE: When the computer is shut down, the current mixer state is saved. When the
computer is restarted, the mixer state is restored. This function is independent of Mixer Scene
operation.

Rate Select
This button displays the current sample rate of the Aurora and can also be used to select a
desired sample rate when the Aurora is operating off of its Internal Clock. However, when
on Internal clock, the sample rate is generally determined by the audio application being
used, or the default sample rate settings in the operating system.

Sync Source
This is a combo box version of the Preferred Clock Source switch on the Adapter Page. See
#5 from the section below. From this combo box all of the possible Aurora SYNC SOURCE
options can be selected.

Adapter
This button toggles whether the Adapter settings are visible from the Main window or not.
The Adapter section, when visible, appears on the left part of the screen.

Record
This button toggles whether controls for the Record Sources are visible from the Main
window or not. The Record Source section, when visible, appears as the top pane of faders in
the Lynx Mixer.