Display other informations, English, Fixing problems – Marantz DR6000N User Manual
Page 22: Menu messages
19
ENGLISH
Fixing problems
If you think your CD-Recorder is defective, it is wise to read this
list first. Maybe you forgot a simple step.
Warning!
Under no circumstances should you attempt to repair the
CD-recorder yourself as this will invalidate the guarantee.
No power
•
ensure that the
POWER ON/OFF (1) button is on: the
CD-Recorder is in standby mode, press any button to
activate it
•
ensure that the power cord is plugged in correctly
•
switch the recorder OFF and then immediately back ON
Auto track does not work
•
check if auto track is selected
•
check if there are 2.7 seconds silence in between the
tracks (analog recording only)
•
check if the source is consumer source with the digital
output according to IEC audio standard
•
source is DVD disc (no track information)
No sound
•
check the audio connections
•
if using an amplifier, try using a different source
Amplifier sound is distorted
•
check that the CD-Recorder analog output is not con-
nected to the amplifier PHONE input.
Play will not start
•
ensure that the label of the CD is facing up
•
clean the disc
•
check that the disc is not defective by trying another disc
Remote control does not work
•
point the remote control directly at the CD-Recorder
•
check the batteries and replace if necessary
•
select the right source first
•
set the remote control selector to ‘INTERNAL’
Will not record
•
clean the disc
•
check if CD-R(W) is an unfinalised disc
•
check that the disc is recordable and replace if neces-
sary
•
the disc is not an audio disc (
)
•
wrong input source chosen.
•
text memory full (
/
).
When a CD-RW has to be unfinalised for recording.
Erase text for other disc(s) or finalise other disc(s) to
obtain memory space.
Recording is distorted
•
make sure the recording level was not too high
20 second pause between recordings
•
see ‘RECORDING’ CD SYNC
DISPLAY
OTHER INFORMATIONS
Menu messages
................... when attempting to edit text for a
disc which has no tracks
................... when entering Text Edit mode
........... when editing or erasing an artist
name
.............. when editing or erasing a title
............... when editing or erasing an artist
name per track
................. when editing or erasing a title per
track
................. when entering Text Erase mode
...................... when entering All Text mode
...................... when confirmation for erasing has
to be given with ENTER key
........... when confirmation for erasing has
to be given with ENTER key
........... when waiting for confirmation when
erasing a disc
................... when selecting text review per
unfinalized disc in memory
........... when REVIEW is selected while no
text is in memory
............... when selecting auto track incre-
ment ON or OFF
...................................... Auto Track increment on
.................................... Auto Track increment off
.............. when selecting BALANCE
......................... no text stored for disc