MBM Corporation 46 - Manual (Page 8)

T10103 Dec 2000
2.4 Explanation of the menus, continues
MODE On-line
PROOF
PROOF
CLEAR COUNTER
CLEAR COUNTER
PRESET COUNTER
On-Line
Off-Line
Off-Line
Stand Alone
Sheets/Set= 1
L=210mm BS=70%
Clear Counter
00075
Counter :00100
Remaining :00025
START 00075
MODE On-line
Scrolling down from the ”Start Menu”, using the arrow but-
tons, you will find several options. Press the OK button at the
desired option to enter the corresponding ”Adjustment
Menu” as illustrated in the figure to the left. How each adjust-
ment menu works in detail will be described later on in this
text. After adjustments press the OK button to confirm
changes or the ESC button to cancel. In either case you will
be returned to the ”Option Menu’s”.
Decide whether the Model 46 should be on-line or off-line
with the system or function as a stand alone unit.
This menu provides information of basic settings, number of
sheets per set, insert length and belt speed. No changes
can be made here.
Clears the set counter when the OK button is pressed.
Enter the number of sets for the preset counter using the
arrow buttons. Default value is 0. This menu can also be
used to check the setting of the preset counter and the
number of sets to go before the job is completed.
NOTE: When checking, use the “ESC” button to leave the menu
without changing the settings.
Option Menu
Adjustment Menu
Counter :00100
Remaining :00025
CLEAR COUNTER
PRESET COUNTER
Booklet Feeder Model 46 Operator Manual 2-5