Transport operation, Programming for crease mode – MBM Corporation iCREASE PRO User Manual
Page 8
Advertising
TRANSPORT OPERATION
• The Run Button will start the Transport in any given mode. Press it
again to stop the transport. Each Mode has a timeout feature to
preserve the life of the machine.
• A document may be slowly advanced through the transport by
pushing and holding one of these buttons.
EXAMPLE:
The motor should advance transport at slow speed and stop
whenever finger is lifted.
• Controls on-off function of motor.
EXAMPLE:
Machine will run at mode and speed previously selected.
• Machine will stop.
PROGRAMMING FOR CREASE MODE
Half Fold: Press the Half Image> Start Measuring > Physically Run a sheet through the
machine for the sensor to measure > Accept > Run.
EXAMPLE:
5
Advertising