Metz MECABLITZ 50 AF-1 digital Pentax - Manual (Page 102)

ķ
9.4 Auto OFF for the flash unit
The auto OFF for the flash unit can be set so that it occurs after 10 minutes,
1 minute or is deactivated.
Setting procedure
• Press button combination „Select“ until
the symbol flashes.
• Apply the setting desired with the buttons
+ and —.
– When „10min“ is displayed, Auto OFF
function will be activated after 10 minutes.
– When „1min“ is displayed, the Auto
OFF will be activated after 1 minute.
– When „OFF“ is displayed, the Auto
OFF is deactivated.
The setting takes effect immediately.
After about five seconds the display stops flashing and the setting is saved auto-
matically.
After activation of the auto OFF the display shows .
9.5 Modelling light („ML“)
The modelling light is a high-frequency stroboscopic flash. It creates the impres-
sion of a semi-permanent light for a duration of about 3 seconds. The modelling
light enables the user to assess light distribution and the formation of shadows
before taking pictures. The modelling light is triggered with the manual firing
button
ቤ.
Setting procedure
• Press the button combination „Select“
until „ML“ flashes in the display.
• Apply the setting desired with the buttons + and —.
– When „ML ON“ is displayed, the
modelling light is activated.
– When „ML OFF“ is displayed, the
modelling light is deactivated.
The setting takes effect immediately.
After about five seconds the display stops flashing and the setting is saved
automatically.
After activation of the modelling light function „ML“ appears in the display.
102
OFF
10min Ȅ
Ȅ
☛☛
OFF
10min Ȅ
☛
10min
OFF
ML
☛ ☛
ML
On
ML
☛
On
709 47 0191.A3 50AF-1 Pen. 17.12.2010 13:22 Uhr Seite 102