Microsens Fast Ethernet 2 Port Multifunction Bridge - Manual (Page 3)

Multifunctional Bridge 10/100Base-TX/100Base-FX Page 3/8
MICROSENS GmbH & Co. KG - Kueferstr. 16 - D-59067 Hamm / Germany - Tel. +49 (0)2381/9452-0 - Fax -100 - www.microsens.com
Construction
Rx
Rx
TX2
TX1 FX1 PWR
FX2
Tx
Tx
Multifunctional Bridge
MICROSENS
LED-displays
DIP-switch for
configuration
Fuse 500 mA, slow
10/100Base-TX ports
100Base-FX ports
1 3 5 7 2 4 6 8 9
11 10 12 13 15 14 16
Configuration
All operation modes can be configured with the network management (with
MS416020) or the DIP switches. The selection about the configuration is done by DIP
switch 13.
Function Switch 13 Description
1 ON Configuration through management (DIP switches 1-12
and 14-16 without function)
2 OFF Configuration per DIP switches
To configure the different operating modes the module has several DIP switches. The
selection of the main functionality is done by DIP switches 14, 15 and 16:
Function Switch 14 Switch 15 Switch 16 Description
1 OFF OFF OFF Fiber-Bridge
2 OFF OFF ON 2 channel Bridge
3 OFF ON OFF Redundant Bridge
4 OFF ON ON 4 Port Switch