Monster SuperStar BackFloat Waterproof Bluetooth Speaker - Manual (Page 5)

(From now on, when you turn on SuperStar™ BackFloat™, it
will automatically search for the last Bluetooth device it was
paired with).
NOTE: The unit has the ability to reset your Bluetooth pairing
information on SuperStar™ BackFloat™. To do this press and
hold the Bluetooth button for more than five seconds and
previous pairing information will be deleted from SuperStar™
BackFloat™.
USB Connection
You can connect your SuperStar™ BackFloat™ directly to a
playback device using the included USB cable. In this mode
we recommend controlling volume and track selection from
your playback device.
Wired Connection
SuperStar™ BackFloat™ has a standard 3.5mm audio in jack.
If there is no Bluetooth source available of if you simply
prefer a wired connection, you can connect your SuperStar™
BackFloat™ directly to your audio source using a stereo
3.5mm connector. You will need a cable with stereo male
3.5mm connection on both ends of the cable. (This cable is
not included)
Play / Pause
You can play and pause your music using the Bluetooth
button. To perform this function press and release
the button quickly.
LIMITED WARRANTY
FOR CONSUMERS
Monster, LLC, 7251 West Lake Mead Blvd., Las Vegas, NV 89128, USA, [PLEASE
NOTE THAT MONSTER DOES NOT ACCEPT PRODUCTS SHIPPED TO THIS
ADDRESS – FOLLOW INSTRUCTIONS IN “HOW TO MAKE A CLAIM” BELOW]
(415) 840-2000 (“Monster”) extends You this Limited Warranty. Statutory or
common law may provide You with additional rights or remedies, which shall
not be affected by this Limited Warranty.
DEFINITIONS
“Adequate Use” means personal use of the Product (i) for private (as opposed
to commercial) purposes, (ii) in conformance with all applicable law, code or
regulations (including without limitation building and/or electrical codes),
(iii) in accordance with manufacturer recommendations and/or instructions
in the materials and documentation that accompany the Product, and (iv) if
applicable, with proper electrical grounding.
“Authorized Dealer” means any distributor, reseller or retailer that (i) was duly
authorized to do business and permitted to sell You the Product under the laws
of the jurisdiction where You bought the Product, (ii) purchased the Product
directly from Monster or from a party with a contractual relationship with
Monster and in accordance with the authorized terms and conditions of such
agreement, and (iii) sold You the Product new and in its original packaging.
“Formal Warranty Claim” means a claim made in accordance with the section
“Formal Warranty Claims” herein.
“Product” means a Product (i) that is listed in the Specifications Table below,
(ii) that You bought from an Authorized Dealer new and in its original packaging,
and (iii) whose serial number, if any, has not been removed, altered, or defaced.
“Product Defect” or “Defective Product” means an inadequacy of the Product
that existed at the time when You received the Product from an Authorized
Dealer and that causes a failure of the Product to perform in accordance with
Monster’s documentation accompanying the Product, unless such failure has
been caused completely or partly by (a) any use other than Adequate Use,
(b) transportation, neglect, misuse or abuse by anyone other than Monster’s
employees; (c) alteration, tampering or modification of the product by anyone
other than a Monster employee; (d) accident (other than a malfunction that
would otherwise qualify as a Product Defect); (e) maintenance or service of the
Product by anyone other than a Monster employee; (f) exposure of the Product
to heat, bright light, sun, liquids, sand or other contaminants; or (g) acts outside
the control of Monster, including without limitation acts of God, fire, storms,
earthquake or flood.
“Warranty Period” means the time period during which Monster must have
received Your Formal Warranty Claim. The different Warranty Periods related
to Product Defects are defined in the Specifications Table below. The Warranty
Period commences on the date when You purchased or received (whichever
Speakerphone
When paired with your phone via Bluetooth you will be
able to make and receive calls.
How to answer a call:
Press and release the Bluetooth button to answer the call.
To reject a call:
Hold the Bluetooth button down for 3 seconds.
To end a call:
Press and release the Bluetooth button.
You can also continue to answer, reject or hang up from
your phone.
Audio Priority
Because SuperStar™ BackFloat™ has so much connectivity,
there is a built-in process for prioritizing the various inputs.
First Priority:
Bluetooth connection has priority for music and phone.
Second Priority:
USB. Audio from the USB cable has second priority.
Third Priority:
3.5mm AUX In has third priority.
Inputs don’t overlap, you will always hear a connected
phone.
ENGLISH