Montigo PVHIN58-300 - Manual (Page 18)

PVHIN58-300 with TMHIN58-40
Page 18
XG0521 - 111214
Step 7. Strip about 3/8" to 1/2" off all wire that was cut.
Figure 10. Section 6
Step 8. Twist brown wire from blower together with the other black wire from
capacitor. Using small bell connector supplied, crimp wires together.
Figure 11. Section 6
Step 9. Twist white fibre wire from power cord together with black wire from
blower and one black wire from capacitor. Using large bell connector sup-
Figure 12. Section 6
Step 10. Using suppied zap strap, secure wire bundles together.
Figure 13. Section 6
Service