Conduit and wiring clearances, Installation – Montigo PVHIN58-300 User Manual

Page 9

Advertising
background image

PVHIN58-300 with TMHIN58-40

Page 9

XG0521 - 111214

Step 8.

Attach the power cable from the power vent to the control cable.

Step 9.

Push all excess cable back into the component cover. Screw electri-

cal plate back on the power vent.

Figure 12. Section 3

Figure 13. Section 3

1” Clearance

Wire

Conduit and Wiring Clearances

Connect the power vent harness as outlined� Connect

the wiring to the fireplace as outlined in the schematic

showin in

Figure 14 Section 3� Ensure that the proper

clearances are maintained for the wiring and conduit.

When installing the wiring, it must never run above the

vent pipe and it must be at lest 1" clear of all venting and

other hot surfaces�

Figure 14. Section 3

Installation

Advertising
This manual is related to the following products: