Montigo PVHIN58-300 - Manual (Page 8)

PVHIN58-300 with TMHIN58-40
Page 8
XG0521 - 111214
Step 5. Remove two screws securing electrical plate.
Step 6. Remove power vent cable from inside component cover.
Step 7. Take electrical harness [EPVH-10-100] that will communicate with
the power vent, and attach the strain relief for it to the electrical plate. Tighten
the nut on the strain relief.
Figure 10. Section 3
Figure 11. Section 3
Figure 8. Section 3
Figure 9. Section 3
Installation