NavCom LAND-PAK Rev.F - Manual (Page 127)

LAND-PAK™ User Guide – Rev. F
B-128
Figure 84: Mounting the Cable to the Radio
10. Connect the serial cable:
a. Connect the LEMO 8-Pin end of the cable to
the radio modem
b. Connect the LEMO 7-Pin end of the cable to
COM 1 of the SF-3040 GNSS receiver
c. Connect the battery terminal cables to a
battery for power.
The external battery is not included with
LAND-PAK.
A 60Wh battery is sufficient to power the SF-
3040 for 10 hours. For a 12V battery, the
capacity should be rated 5Ah, and for a 7.4V
battery, the capacity should be 8.1Ah.
11. The Base Boost Radio is now ready for setup and
use.