NavCom LAND-PAK Rev.F - Manual (Page 84)

LAND-PAK™ User Guide – Rev. F
5-84
View StarFire Status
Perform the following steps to check StarFire status:
1. Open FieldGenius and create a project or select
an existing project (see the Field Genius User
Guide for detailed instructions).
2. On the Link Configure dialog box (refer to Figure
40), select StarFire.
3. Click Connect.
4. On the map page, click .
5. On the Instrument Settings dialog (refer to
Figure 44), select StarFire Status.
Figure 44: Instrument Settings/StarFire Status
6. On the StarFire Status dialog (refer to Figure 45),
view the StarFire parameters.