OnLine Power Power Wave 1 - Manual (Page 21)

6005-085 Rev B
20
9. Output Voltage and Frequency Adjustment Menu:
a. Press the ON/OFF Control key to set the output voltage or frequency.
b. The cursor () appears to indicate the selection of output voltage or frequency.
c. Use Up or Down key to adjust the output voltage to 220V, 230V or 240V for 220V
systems or 100V, 110V, 115V or 120V for 120V systems. The output frequency can be
set to 50Hz or 60Hz.
d. Once the correct voltage or frequency is selected, press the ON/OFF Control key again to
save the data.