Onwa Marine Electronics KAP-866 - Manual (Page 7)

Thanks you for purchasing the ONWA KAP-866 Autopilot.
The KAP-866 Autopilot controls the vessel steering through mechanical drive,
reversing pump set, solenoid valves or relays.
The compass must be installed in a place free of magnetic interference, and
connected to the autopilot via the cable supplied.
The rudder feedback must be attached to the rudder in such a way that it can
accurately measure the position of the ship's rudder. This must also be conne-
cted to the autopilot via the cable supplied.
KAP-866 is designed and constructed to meet the rigorous demands of the
marine environment. However, no machine can perform its intended function
unless properly installed and maintained.
Please carefully read and follow the operation, installation and maintenance
procedures set forth in this manual.
We would appreciate feedback from you.
Thank you for considering and purchasing ONWA.
2
FOREWORD