Osburn OB01520 User Manual
Page 59
Soho Installation and Operation Manual
______________________________________________________________________________ 59
CAUTION: ENSURE THAT THE BLOWER’S AND/OR THE THERMODISC’S POWER CORD ARE NOT IN
CONTACT WITH ANY SURFACE OF THE STOVE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE.
DO NOT RUN THE POWER CORD BENEATH THE STOVE.
APPENDIX 5: INSTALLATION OF SECONDARY AIR TUBES AND BAFFLE
1-
Starting with the rear tube, lean and insert the right end of the secondary air tube into the rear
right channel hole as shown in DETAIL 1. Then lift and insert the left end of the tube into the
rear left channel.
2-
Align the notch in the left end of the tube with the key of the left air channel hole. Using a
« Wise grip » hold the tube and lock it in place by turning the tube as shown in DETAIL 2.
Make sure the notch reaches the end of the key way.
3-
Repeat step 1 and 2 for the other secondary air tubes.
4-
To remove the tubes use the above steps in reverse order.