Paslode IMCT Cordless Framing Nailer - Manual (Page 15)

15
Fasteners and Applications
SIZE TYPE APPLICATION
2" x .113 (6D) Common Ring Shank Underlayment, wall sheathing,
roof and floor decking,siding
2" x .113 (6D) Common ring shank, Fencing, siding
hot-dipped glavanized,
hot-dipped glavanized plus
2-3/8" x .113 (8D) Cooler ring shank Roof & floor decking, underlayment,
sheathing
2-3/4" x .113 (8D) Coated ring shank, Recreational decking, siding, fencing
hot-dipped galvanized,
hot-dipped glavanized plus
3" x .120 (10D) Coated nail Remodeling
3" x .120 (10D) Ring shank, hot-dipped Fencing, recreational decking, siding,
galvanized plus tile roofs
3" x .131 (10D) Coated nail Framing
3-1/4" x .131 (12D) Coated nail Framing
*Fastener sizes are available in clipped head and RounDrive ® . RounDrive ® nails available in limited markets.
Smooth Shank - For general construction, carpentry and
framing: the most popular and versatile.
Ring Shank - The ring shank provides improved withdrawal
resistance for applications where the resistance from smooth
shank fasteners is not adequate: floor decking, crating,
pallets.
Hardened Steel - For attaching wooden plates to green
concrete foundations; 2X furring strips to cinder block.
Hot Dipped Galvanized - These nails should be used
where higher corrosion resistance is required to retard rust
and rust staining. Recommended for use in natural wood
siding, such as cedar, redwood, cypress and preservative
treated lumber. (Not for use in all-weather wood foundations.)
Hot Dipped Galvanized Plus - These nails are hot dipped
with a baked on polymer coating. They offer the highest
corosion resistance of any galvanized nail.
The Paslode Cordless Framing Nailer is not recommended for use with 3"
Ring Shank nails in pressure treated lumber .