Connecting the input pto shaft, Transport safety chain – Progressive Turf Equipment TDR-22 1393176 and Above User Manual

Page 24

Advertising
background image

21

CONNECTING THE INPUT PTO SHAFT

a) Ensure that the tractor engine is shut off and the parking brake is locked.
b) Holding the PTO against the end of the tractor PTO shaft, rotate the tractor

PTO by hand until the shaft slides on slightly.

c) Slide the locking collar on the PTO backwards, releasing the locking

mechanism hold and slide the PTO on.

d) Release the locking ring and pull the PTO shaft backwards until the locking

mechanism snaps into place.

e) Push the shaft forward and backwards to ensure that this is securely locked in

place.




If the PTO shaft comes off during operation, it may cause personal injury and
damage to the PTO shaft and tractor PTO. When checking, make sure the locking
collar is locked, and that the shaft is not just jammed against the end of the tractor
PTO shaft.

TRANSPORT SAFETY CHAIN

It is recommended that the safety chain provided with this mower be attached to the
towing vehicle at all times.






Install a safety chain as shown. After attaching the safety chain, make a test run to
the left and right for a short distance to check for proper adjustment. Readjust to
eliminate a loose or tight chain

.

Advertising