Progressive Turf Equipment TDR-22 1393176 and Above - Manual (Page 31)

28
1
2
3
4
CAUTION:
If the Pro Lift-N-Turn™ system is actuated with the PTO running,
and any of the latch plates are not in the correct position, the Pro
Lift-N-Turn™ system cannot prevent that deck from rising too far.
Damage to the PTO drive will result. It is the responsibility of the
Operator to ensure the Pro Lift-N-Turn™ system is functioning
properly before use.
LOCK PIN POSITIONS
The wing and rear locks (black plates) can be held in place by using the supplied pin.
The holes in the lock mounting plates function as follows.
1. Position to prevent lock
from moving into Pro
Lift-N-Turn position.
2. Use in blade Change
position.
3. Use when mower is in
transport position.
4. Pin storage location.