Rena T-350 - Manual (Page 10)

GETTING ACQUAINTED
Control Panel
1. BATCH COUNTER – Counts tab cycles. The counter can be reset to zero, by
pressing the small button on this device.
Note: The Batch counter will not count items fed in the “paper feed mode”. It
only counts when the unit is in the “tab mode” (tab button illuminated).
2. SPEED CONTROL DIAL – Controls the media transport speed of the tabber.
Clockwise = faster. Counter-clockwise = slower.
Important: If you change the transport speed, the tab fold position will also
change. Please adjust for the desired transport speed before you adjust for the
desired tab fold position.
3. FEED BUTTON – Used to stop/start tabber transport. This button illuminates
when the feed system has been activated.
4. POWER LED– Illumination indicates that the tabber’s Main Power Switch is
on, and the unit is receiving power.
5. TAB BUTTON– Used to turn the tab function on/off.
OFF = Tab Mode Off (Will feed paper without applying tabs.)
ON (illuminated) = Tab Mode Activated
T-350 Operations Rev. 3/23/2009 10