Rena T-350 - Manual (Page 12)

ASSEMBLY
4. Attach both Media Side Guides to the unit as shown.
The bottom of the media side guide fits into the brass
bushing, on the shaft, as shown.
The guides are secured to the mounting blocks using
the two Philips head screws, supplied.
5. Attach the Tab Box Tray.
The hooks on the
Tab Box Tray fit
over the upper shaft,
at the exit end of the
tabber, as shown.
The tray hangs off the exit end of the
tabber.
6. Proceed to “Choosing a Location”.
T-350 Operations Rev. 3/23/2009 12