Caution, Edge cleaning, Settings – Royal Vacuums UR30085 User Manual

Page 18: Cleaning lightweight flexible rugs, How to attach tool cover, Stair cleaning

Advertising
background image

9

edge Cleaning

Special edge groomers

are provided on both

sides of the nozzle to

remove dirt in carpet near

baseboards and furniture.
Guide either side of nozzle

parallel to edge of carpet

or furniture.

settings

For maximum cleaning performance, the following carpet

height settings are recommended:
• Lowest setting: or all types of carpet. Note: If the

cleaner is difficult to push, slide knob to the next higher

setting.
• Higher settings: for very deep pile carpet where easier

pushing effort is desired, while maintaining good clean-

ing performance.

Cleaning lightWeight
Flexible rugs

Stand on one end of rug

and move cleaner toward

other end or edge. Before

reaching edge, push

down on handle. This will

lift up the nozzle (front of

cleaner) as shown and will

prevent rug from clinging

to cleaner. Continue to lift

up nozzle so that when

you have reached the

edge, it is completely off

the rug. Move cleaner

back to start again, lower

nozzle, and use only

forward strokes.

2.11

2.13

2.12

hoW to attaCh tool CoVer

The tool cover is designed

with a “break-away”

feature which allows it to

snap free if it is pushed

open too far.
To reattach, align hinges

of cover with slots on sides

of tool storage area.
Push cover down to

secure in place.

2.14

2.10

HIGH

HARD

FLOOR

2.12 Lift vacuum by Stair Cleaning Handle and

position on stairs. Clean forward to back. Never leave

the vacuum standing on stairs when not cleaning.

stair Cleaning

CAUTION

!

!

Use extra care when cleaning on stairs. To avoid

personal injury or damage, and to prevent the

cleaner from falling, always place cleaner at bottom

of stairs on floor. Do not place cleaner on stairs or

furniture, as it may result in injury or damage.

Advertising