SIGMA DP2x - Manual (Page 108)

107
A. Select Images & Quantity menu
Select / Quantity
This option allows you to select individual
images and the number of copies for printing.
Select the image that you wish to print by
pressing the
button. Then select the
quantity of prints by pressing the button.
Select All Images
This will print all printable still images
recorded on the card. Press the
button to
select the number of copies.
Cancel All Selections
This will reset the number of copies that has
been previously selected. Select [OK] by
using the
button. The selection of images
and number of copies for printing are reset by
pressing the
button. The menu then
returns to Select Image & Quantity menu.
Apply DPOF Settings
(If DPOF setting is not
applied, it is not possible
to select it.)
It is possible to select the printing quantity of
[DPOF] from [
Playback Menu]. (P.109)
WARNING !!
•
If no card is inserted into the camera, [No Memory Card] message
will be displayed.
•
If the card contains still images which cannot be printed, [No
images on Memory card] will be displayed.
•
If [Printer error! Please check the printer.] message is displayed,
please check your printer and ensure that it is correctly setup and
connected.
•
It is not possible to print RAW images (files with the X3F
extension).
•
Some printers do not include a DPOF setting, therefore it is not
possible to select [Apply DPOF Settings] with such printers.