Studio Technologies 742 2005 - Manual (Page 28)

Issue 2, May 2005 Model 742 User Guide
Page 28 Studio Technologies, Inc.
Model 742
Reference Tone:
Frequency and Wave Form: 400 Hz nominal, sine
wave (technician can revise to 1 kHz)
Direct Output Level: +4 dBu, nominal, adjustable
over –1/+3 dB range
Direct Output Type: electronically balanced,
capacitor-coupled, intended to drive balanced or
unbalanced loads of 600 ohms or greater
Direct Output Source Impedance: 100 ohms,
nominal
Meters: 2
Function: displays level of output buses 1 and 2
Type: 10-segment LED, modified VU ballistics
Connectors:
Mic/Line and Line Inputs: 3-pin female XLR-type
Main Outputs: 3-pin male XLR-type
Reference Tone Direct Output, Monitor Outputs,
Headphone Output: ¼-inch 3-conductor phone
jacks
AC Mains: 3-blade, IEC 320 C14-compatible
(mates with IEC 320 C13)
AC Mains Requirement:
100, 120, or 220/240 volts, ±10%, factory config-
ured; 50/60 Hz; 0.2 A maximum @ 100 and 120
volts, 0.1 A maximum @ 220/240 volts
Mains Fusing:
Type: 5 x 20 mm, time-lag
Rating: 0.2 A for 100 and 120 volt AC mains, 0.1 A
for 220/240 volt AC mains
Dimensions (Overall):
19.00 inches wide (48.3 cm)
1.72 inches high (8.9 cm)
9.5 inches deep (24.1 cm)
Mounting: One standard rack space
Weight:
8.5 pounds (3.9 kg)
Specifications and information contained in this
User Guide subject to change without notice.