Sundance SMT6035 v.2.2 - Manual (Page 29)

Version 2.2 Page 29 of 39 SMT6035 User Manual
Parameters
None
Notes:
This function will throw an exception of type SMTExc if CtrlCancel() is
called.
15.6.5 CtrlPut
Sends a control word to the DSP. This function will block until the DSP
has acquired the control word from the host.
Prototype
void HSC::CtrlPut( HSC_WORD w )
Parameters
w The HSC control word to be sent to the DSP.
Notes:
This function will throw an exception of type SMTExc if CtrlCancel() is
called.
15.6.6 CtrlCancel
Cancels any pending control words. Any thread calling CtrlPut or
CtrlGet will throw an exception of type SMTExc.
Prototype
void HSC::CtrlCancel( void )
Parameters
None
15.6.7 ArgsPut
Writes arguments (parameters) to the SRAM area for this channel.
Prototype
void HSC::ArgsPut( UINT nBytes, void *pMem )
Parameters
nBytes The size of the memory pointed to by pMem. The
maximum size allowed is 64KB.
PMem Pointer to the parameters to be copied into the
SRAM.
User Manual - Version 2.2, 04/01/07; © Sundance Italia S.R.L.