Sundance SMT148FX - Manual (Page 43)

TIM Site 1
root CP:0
T1CP0
root CP:1
T1CP1
root CP:2
T1CP3
root CP:16
T1CP4
TIM Site 2
root CP:4
T2CP0
root CP:5
T2CP1
root CP:6
T2CP3
root CP:7
T2CP4
TIM Site 3
root CP:8
T3CP0
root CP:9
T3CP1
root CP:10
T3CP3
root CP:11
T3CP4
TIM Site 4
root CP:12
T4CP0
root CP:13
T4CP1
root CP:14
T4CP3
root CP:15
T4CP4
Virtex 4 comports
root CP:21
V4CP0
root CP:22
V4CP1
root CP:23
V4CP3
Virtex 4 configuration
root CP:3
CBUF
Connection to another SMT148FX
root CP:17
JPCP0
root CP:18
JPCP1
root CP:19
JPCP3
root CP:20
JPCP4
Table 3: Spartan connections
Don’t forget to edit all the connection and select the ifclk clock domain and select
the right link starts up properties.
Figure 12: Connection properties
At reset you must connect a comport from RX to TX or TX to RX. For the default
firmware, the T1CP3 of the TIM root processor is RX at reset, to get its bitstream.
The Spartan firmware comport (root CP:2) will have the link starts up as transmitter
properties.
The next Diagram shows the Default firmware connection with all the connections
properties.
User Manual SMT148FX Page 43 of 48 Last Edited: 03/08/2009 11:42:00