Sundance SMT6060-TCPIP User Manual
Page 15
Revision 0.4
Page 15 of 15
Sundance Digital Signal Processing Inc.
4790 Caughlin Parkway 233, Reno, NV 89519-0907, U.S.A.
Tel: +1 (775) 827-3103, Fax: +1 (775) 827-3664, email:
www.sundancedsp.com
Figure 8 - File selection for IP and MAC change
Note: Specifying an IP address of 0.0.0.0 will cause the SMT363 to obtain an IP address from a DHCP
server; this way you are able to specify the MAC address independently from the IP.
4.1.2. Confirming the configuration
Close the SMT6001 and Code Composer Studio. Ensure that you have HyperTerminal configured and
the RS232 port connected from the SMT363 to your development PC.
Use the SMTBoardInfo application from Sundance, and issue a “Board Reset”.
In the HyperTerminal window of your development PC, you should see output similar to the following: