Sundance SMT6060-TCPIP - Manual (Page 16)

Revision 0.4
Page 16 of 16
Sundance Digital Signal Processing Inc.
4790 Caughlin Parkway 233, Reno, NV 89519-0907, U.S.A.
Tel: +1 (775) 827-3103, Fax: +1 (775) 827-3664, email: [email protected]
www.sundancedsp.com
Figure 9 - HyperTerminal output
NOTE: your IP address will be different according to what your DHCP server assigned for the Net+50
processor (or what you have configured yourself by providing the 0xC50 data section). Take note of
this IP address, as you will need to refer to it later on again.
NOTE: when using DHCP, it can take ~20sec for the Net+50 processor to get its address. The NetOS
delays starting the application until the address are received.