Sundance SMT6060-TCPIP - Manual (Page 20)

Revision 0.4
Page 20 of 20
Sundance Digital Signal Processing Inc.
4790 Caughlin Parkway 233, Reno, NV 89519-0907, U.S.A.
Tel: +1 (775) 827-3103, Fax: +1 (775) 827-3664, email: [email protected]
www.sundancedsp.com
6. EXAMPLES
6.1. BACKGROUND
The folder smt6060-tcpip\examples contains a number of examples. Some of these
examples run on the host machine, and some of them run on the embedded network.
Ethernet network
SMT363
Host
development PC
Other PCs Other PCs
SMTxxx
SMTxxx
SMTxxx
Your embedded system
Figure 12 - Example System Diagram
6.2. BEFORE YOU START
The examples are distributed assuming 1 node module (SMT395_VP30) and the SMT363.
PROCESSOR root SMT395_VP30
PROCESSOR node SMT363XC2_2
You need to change the configuration files of the individual examples to reflect the hardware you have.
Also, make sure you have the relevant wire statements and that the physical wires have been connected
between processors.
The examples are using a wire connection between TIM1 comport 1 and TIM2 comport 4. This comport
connection is available on the SMT310Q carrier board by selecting it with the SmtBoardInfo application.