Sundance SMT6060-TCPIP - Manual (Page 9)

Revision 0.4
Page 9 of 9
Sundance Digital Signal Processing Inc.
4790 Caughlin Parkway 233, Reno, NV 89519-0907, U.S.A.
Tel: +1 (775) 827-3103, Fax: +1 (775) 827-3664, email: [email protected]
www.sundancedsp.com
2. REQUIEREMENTS
To develop with the SMT6060, you need
• Code Composer Studio. v3.1 or later
o Code composer is used to compile programs for the TI DSPs in the network.
• 3L Diamond RTOS version 3.1.4 or later
o Diamond is used as an RTOS that enables any task on the network to access the SMT363.
• SMT6001 v6.01 or later (recommended)
o The SMT6001 is a utility with which you manage the contents of the flash for Sundance
modules.
• SMT6300 v3.07 or later (recommended)
o Low level driver support for the host machine.