Super Systems 9015 Series - Manual (Page 9)

Super Systems Inc. Page 9 of 11 Series 9015 Operations Manual
Figure 8 - Changing of "Slave 2 Mode" Setting in Port Setup Menu
Next, under the “Furnace Setup” menu, change “Slave Event Boards” to the number of
9015 instruments that you are slaving to the 9205 or 9220 ( Figure 9 ).
Figure 9 - Setting the Number of Slave 9015 Instruments
Next, under “Relay Assignments”, change the relay assignments for the 9015
instrument module ( Figure 10 ). Module 1 is the first 9015, starting with relay 1,
instrument terminal 8.