Super Systems SuperDATA Installation - Manual (Page 3)

Super Data Workstation Page 3
Installation Procedure
Overview
The Super Data workstation installation procedure will install all of the necessary files onto the
workstation. There are seven steps in this process:
1. Map the Super Systems Inc computer on the network as drive “S”
2. Run the installation of the Super Data workstation provided on the CD
3. Copy the SDIO.ini and PM6.ini files to the Windows directory
4.
Edit the SDIO.ini file and change the reference to all drives from “C” to “S”
5. Edit the PM6.ini file and change the reference to all drives from “C” to “S”
6. Create a shortcut on the desktop pointing to the Overview screen
7. Create a Data Source