Sureshotgps 8850x - Manual (Page 10)

9
4. Status – Features
GPS – GPS Signal:
To check the GPS Signal: Go to Main menu > Features> Status > GPS Information
> GPS Signal.
It will display the satellite number and signal strength for each satellite. A blue bar
indicates that the satellite is being used in the position calculation. A red bar indicates
that the satellite signal is being received but it is not used in the position calculation.
The latitude and longitude of the current position is also displayed.
Distance Walked:
You can measure the distance you have walked for the round / day.
Go to Main menu > Features> Status > GPS Information > Navigation
It will display an odometer which can be set to kilometres or miles. This reading can
be reset after you have measured the distance required. The speed at which you are
travelling and the heading in degrees can also be measured.
Battery Status:
To check the status of the lithium ion battery:
Go to Main menu > Features > Setup > Battery Status > Select.
The reading is in a % of 100.
Registration – Check for ownership:
Go to Main menu > Features > Status > Registration > Select
Displays the software version, unique electronic serial number, registration date and
owner details.
Reset Unit: Go to Main menu > Features > Status > Reset Unit
This enables you to reset the Sureshotgps™ to the factory settings. It will delete all
loaded courses, saved games and reset features to their default values. It does not
reset the registration details.