SUUNTO G9-3 - Manual (Page 29)

29
Setting the air pressure unit
The Pres setting defines the unit in which the air pres-
sure is displayed. The options are hPa and inHg .
To change the air pressure unit:
1. In the Set menu, scroll to
Units and short press Enter .
The Units menu is displayed.
2. Scroll to Pres and short press Enter . The air pressure
unit field is activated.
3. Select the correct unit with the arrow buttons and
short press Enter . The air pressure unit is now set.
Setting the elevation unit
The Elev setting defines the unit in which the elevation is
displayed. The options are meters (m) and feet (ft).
To change the elevation unit:
1. In the Set menu, scroll to
Units and short press Enter .
The Units menu is displayed.
2. Scroll to Elev and short press Enter . The elevation unit
field is activated.
3. Select the correct unit with the arrow buttons and
short press Enter . The elevation unit is now set.
Setting the distance unit
The Dist setting defines the unit in which the distance is
displayed. The options are meters (m) and yards (yd).
To change the distance unit:
1. In the Set menu, scroll to
Units and short press Enter.
The Units menu is displayed.
2. Scroll to Dist and press Enter. The distance unit se-
lection is activated.
4. Select the distance unit with the arrow buttons and
short press Enter. The distance unit is now set.