Swim'n Play Slim Style Oval Pool - Manual (Page 17)

Remove wall from
carton.
NOTE: the UP arrow
on the wall.
Determine starting
point as the filter
inlet and outlet holes are
at the beginning of the wall. Starting at the center of a bottom plate insert
the bottom edge of the wall into the groove on the bottom rail. Ensure that
the center line of the closure holes in the the wall align with the center
of the plate. Make sure that the cutouts for filter inlet and outlet are on the top portion of the wall and will not
be hidden behind a vertical. If the wall ends do not meet, adjust the bottom rail in or out of the bottom plates.
The spacing in all bottom plates should be equal.
Make sure that the starting position of the wall and skimmer inlet and outlet holes are on the same end of the pool.
SKIMMER INLET
4’ x 4’ Plywood
SKIMMER OUTLET
17
Note: The 45 1/2" Rails are to be placed on the bottom straight side of the pool.
The
42 1/4" Rails are to be placed on the top straight side of the pool.