Tech Source Raptor DL-Lite Drivers for Linux - Manual (Page 10)

Raptor DL-Lite Drivers for Linux Installation & Reference Manual
2-2
Step 2:
Install the Raptor graphics card firmly into the
PCI slot. Take care to press it evenly and
snugly into the slot. Once you are certain the
card is installed properly in the slot, secure it
with the bracket screw.
Step
3: Secure the system's cover, attach any
previously removed cables, and connect the
video card to your monitor.
The Raptor graphics card is now installed and the system is
ready for software installation. Refer to Chapter 3 for installing
and configuring the “Raptor DL-Lite Drivers for Linux” software.