Teletronics WL11000SA-N User Manual
Page 12
User’s manual – WL11000SA-N
12
The TCP / IP Setting page displays the categories of information and the parameters setting
shown below.
NOTE:
WL11000SA-N build in the DHCP Client function, it means the AP will get all
the IP address, subnet mask and default gateway values from DHCP server while AP
powers on the network.
If you want to set these yourself, please enter the new IP address, subnet mask and default
gateway properly in the “New Settings” section of the “TCP/IP Settings” screen then click on
“Apply Changes”
For the convenient of identification, the WL11000SA-N Access Point could be assigned an
alias name in the “AP Name” field.
A password is required to configure the WL11000SA-N Access Point. We suggest changing
your password from the default value to ensure network security.