System requirements – Teletronics WL11000SA-N User Manual
Page 6
Advertising
User’s manual – WL11000SA-N
6
System Requirements
Before you install the WL11000SA-N Wireless Access Point, be sure you can meet the
following requirements:
² An A/C power outlet (100~240V, 50~60Hz) which will supply power for the access
point
² An available RJ-45 (UTP) port on a 10BASE-T or 10/100BASE-T Ethernet hub or
switch.
² 802.11 compliant Wireless Ethernet adapters with TCP/IP compatible protocol
installed.
² Web Browser for configuration.
Advertising