Pcs-com in-line and t-splice kit – Thermon PCS-COM User Manual
Page 2
5
1
Kit Contents . . .
The following installation procedures are suggested guidelines
for the installation of Thermon’s PCS-COM connection systems.
They are not intended to preclude the use of other methods and
good engineering or field construction practices.
Receiving, Storing and Handling . . .
1. Inspect materials for damage incurred during shipping.
2. Report damages to the carrier for settlement.
3. Identify parts against the packing list to ensure the proper
type and quantity has been received.
4. Store in a dry location.
Dimensions . . .
Item
Quantity
Description
1
1
Expediter Assembly
Splice cap
Grommet
Expediter Base
2
1
Caution Label
3
1
UL Label
4
3
Splice Connection Boots
5
2
End Cap ET-6 (FLX-OJ and HSX Cable)
6
2
End Cap ET-8 (FLX-BC Cable)
7
3
Wire Nut
8
2
RTV Tube
9
1
12/10 AWG Splice Lug
10
2
8 AWG Lug Butt Splice
11
1
12 AWG Green Ground Wire
1
2
Tools Required . . .
Certifications/Approvals . . .
7
4
Installation Precautions . . .
•
To minimize the potential for arcing and fire caused by product
damage or improper installation use ground-fault protection.
The National Electrical Code (NEC) and Canadian Electrical Code
(CEC) require ground-fault protection of equipment for each
branch circuit supplying electric heat tracing.
• Installation must comply with Thermon requirements and be in-
stalled in accordance with the NEC, CEC, or any other applicable
national and local codes.
• Component approvals and performance ratings are based on
the use of Thermon specified parts only. User supplied power
connection fittings must be listed or certified for intended use.
• De-energize all power sources before opening enclosure.
• Keep ends of heating cable and kit components dry before and
during installation.
• The kit instructions should be used in conjunction with the
installation instructions for the heating cable and other accessory
items.
PCS-COM In-line and T-Splice Kit
Pipe Heating Cable 134N
HSX® or FLX™ Heating Cable System
Install Cable per NEC Article 427
Thermon Manufacturing Co.
100 Thermon Dr., San Marcos, Texas 78666
1-800-730-4328 PN 27400
3
6
9
11
47mm
(1.32")
96mm
(3.80")
36mm
(1.44")
10
8