Thinklogical VDA Manual - Manual (Page 7)

V D A S e r i e s D V I S p l i t t e r s , R e v . C , M a y , 2 0 1 4 Page 4
1.2. Product Overview
Thinklogical’s VDA-1DVI Splitter sends a single-link DVI video source to 2 single-link DVI
displays, while the VDA-2 sends a single-link DVI video source to 4 single-link DVI displays,
each without any signal loss.
The VDA-3 sends one dual-link DVI video source to 2 dual-link DVI displays, also without loss
of signal.
The VDA-5 houses four splitters (1 single-link DVI In to 2 single-link DVI Out) in one 19” rack-
mountable, AC powered chassis. Installation for all models is plug-and-play and no adjustments
are necessary.
2. System Features
2.1. General System Features
The VDA Series DVI Splitters consist of the four splitter types described above. Each single unit
is supplied with a DC power supply and all required cabling. The rack-mountable chassis is
supplied with an AC line cord and all required cabling.
The VDA Splitter system includes the following features:
• Single-Link 1 In - 2 Out (VDA-1)
• Single-Link 1 In - 4 Out (VDA-2)
• Dual-Link 1 In - 2 Out (VDA-3)
• Four splitters in one 19” rack-mountable chassis each send 1 Single-Link DVI In to 2
Single-Link DVI Out (VDA-5)
• Flawless image quality with no frame dropping
• DDC2B compliant (Video source connects to output 1)
• Simple plug and play
• Small form factor
• Compatible with all Thinklogical DVI Extenders
• Required cabling is included
• Required power supplies or line cords included.