Venstar T1100REC - Manual (Page 3)

STEP #1 PREPARATION
Drill with 3/16
inch Drill Bit
(when not using
j-box)
Proper installation of the thermostat will be
accomplished by following these step by step
instructions. If you are unsure about any of
these steps, call a qualified technician for
assistance.
Assemble tools.
Flat Blade
Screwdriver Wire cutter
& Stripper
Make sure your Heater/Air Conditioner is
working properly before beginning installation
of the thermostat.
Carefully unpack the thermostat. Save the
screws, wall anchors, and instructions.
Turn off the power to the Heating/Air
Conditioning system at the main fuse panel.
Most residential systems have a separate
breaker for disconnecting power to the furnace.
Page 2
HEAT
COOL
FAN
POWER
HEAT
COOL
FAN
POWER
HEAT
COOL
FAN
POWER
HEAT
COOL
FAN
POWER
HEAT
COOL
FAN
POWER