Verilink AS4000 (34-00244) Product Manual - Manual (Page 202)

B-2 Verilink AS4000 User Manual
Terminal Port Use the terminal port to connect to an external terminal providing
RJ-11 modular connectors.
Table B-2 Terminal Port Pinout
10BaseT The Ethernet 10BaseT port provides an RJ-48 connector for
connection using twisted pair cabling.
Table B-3 10BaseT Pinout
Phone Line Port The phone line port provides a US standard RJ-11 6-position jack
with the active pair on the center pins.
Table B-4 RJ-11 6-Position, 4 Pin Jack
Term Port (RJ11) DCE
1 signal ground
2 CTS (output)
3 RTS (input)
4 RXD (output)
5 TXD (input)
6 chassis ground
10BASE-T (RJ48)
1 transmit pair TX+
2 TX-
3 receive pair RX+
4 not used
5 not used
6 RX-
7 not used
8 not used
1 vacant
2 NC
3 RING
4 TIP
5 NC
6 vacant