Displaying the remaining battery charge, Maximizing battery discharge time, Identifying low battery levels – HP Elite X3 User Manual

Page 27: Resolving a low battery level, Disposing of a battery, Replacing a battery, Using external ac power, Disposing of a battery replacing a battery

Advertising
background image

Displaying the remaining battery charge

Press and hold the battery charge status button until the battery charge status lights turn on.

Maximizing battery discharge time

Battery discharge time varies depending on features you use while on battery power. Maximum discharge
time gradually decreases as the battery storage capacity naturally degrades.

Tips for maximizing battery discharge time:

Lower the brightness on the display.

Connect the HP Elite x3 to the lap dock using the included cable.

Turn off the keyboard backlight by pressing

fn

+

f12

.

Identifying low battery levels

When a battery that is the sole power source for the lap dock reaches a low or critical battery level, the
following behavior occurs:

The low battery and TouchPad light turns amber. To locate the low battery and TouchPad light, see

Lights on page 7

.

If the lap dock is on or in the Sleep state, the lap dock remains briefly in the Sleep state and then shuts down.

Resolving a low battery level

Resolving a low battery level when external power is available

Connect the included AC adapter.

Resolving a low battery level when no power source is available

To resolve a low battery level when no power source is available, shut down the lap dock.

Disposing of a battery

When a battery has reached the end of its useful life, do not dispose of the battery in general household
waste. Follow the local laws and regulations in your area for battery disposal.

Replacing a battery

The battery(ies) in this product cannot be easily replaced by users themselves. Removing or replacing the
battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support.

Using external AC power

WARNING!

To reduce potential safety issues, use only the AC adapter provided with the lap dock, a

replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.

NOTE:

For information on connecting to AC power, see the Setup Instructions poster provided in the lap

dock box.

External AC power is supplied through an approved AC adapter or an optional docking or expansion device.

Using external AC power

21

Advertising