Mounting, Cooling – Westermo MRD-350 User Manual
Page 27
Advertising
27
6623-2221
Cooling
The router should be mounted in a
clean and dry location, protected from
water, excessive dust, corrosive fumes,
extremes of temperature and direct
sunlight. Allow sufficient ventilation to
ensure adequate cooling of the router.
10mm
10mm
1 2
Mounting
This unit should be mounted on 35 mm DIN-rail, which is horizontally mounted inside an
apparatus cabinet or similar. Snap on mounting, see figure.
Mounting the MRD-350 with integrated DIN-clip:
Advertising