5 configuration – Westermo RM-505U-2-E User Manual
Page 8
Advertising
505U Radio Telemetry Module
Page 8
© September 2002
1.5 Configuration
Each module must be configured before it can be used. Configuration is performed using a PC (or a
laptop computer) connected to the module via the internal RS232 port on the 505U. 505U
configuration software is required and is provided with each order.
Configuring a module requires the entering of “input mappings” and setting operating parameters for
each input. An “input mapping” links an input signal to an output channel at a remote module (or a
“destination address”). An input mapping is entered for each input signal (external and internal)
which is used.
Advertising