ACTi PMON-1001 - Manual (Page 16)

www.acti.com
PMON-1001 Product Manual
16
Network connection between mobile device and camera
The camera installation kit PMON-1001 acts as WLAN Access Point to provide the IP address
to the mobile client (Apple device) by DHCP protocol. Thanks to the smart DHCP design,
PMON-1001 will be able to have itself, the camera and the mobile device all in the same
network subnet without changing the IP settings of the camera.
PMON-1001 searches for the
camera on LAN based on ACTi
camera search protocol
Camera found Camera not found
PMON-1001 assigns itself a default IP address
192.168.0.1. This can be used when
connecting a PC with PMON-1001 over LAN
for PMON-1001 settings adjustment.
Camera is in
Dynamic IP
mode (factory
default)
Camera is in
Static IP mode
(set by user
previously)
PMON-1001 assigns
to itself an IP address
within the same
network segment as
the camera.
PMON-1001 then provides wireless access for the
client. When client connects, PMON-1001 DHCP
server assigns the IP address to the mobile client
within the same network segment as the camera
and PMON-1001.
PMON-1001 DHCP
server assigns the IP
address to the camera
and itself so that both
of them would be in
same network
segment.