Safety instructions – ACTi PMON-1001 User Manual
Page 7
PMON-1001 Product Manual
Safety Instructions
Don’t use wrong power specifications
This device is likely to be damaged or damage other equipments / personnel, if you use a
power supply with different voltage than the correct one. All warranty of this product will be
voided in the situations above. The above mentioned damages may be caused by either of the
following conditions:
Wrong power supply for given charger
Wrong power specification battery used with given charger
Wrong power specification battery used in PMON-1001
Don’t open the casing of the product except the battery section
Warranty of this product will be voided if the casing of PMON-1001 has been opened, except
the battery section.
Cleaning
Avoid any water getting into PMON-1001 while cleaning its surface. For safety reasons, remove
the battery from the device before cleaning it. Warranty of this product will be voided if the
water gets into PMON-1001 and damages the device.
Water and Moisture
Do not use this video product near water, for example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool and the like. Do not use it outdoors
in a rainy or snowy day. Warranty of this product will be voided if the water gets into
PMON-1001 and damages the device.
Servicing
Do not attempt to service this video product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Damage Requiring service
Refer servicing to qualified service personnel under the following conditions.
1) When the power-supply system is damaged (PMON-1001 does not start up or does not
provide PoE power to camera)
2) If liquid has been spilled, or objects have fallen into the video product.