Airlink APSUSB201W User Manual
Page 17
-
Update Firmware: Click this button to update the firmware
of the selected print server.
-
Show Web Setup: Click this button to open your web
browser and launch the Configuration Utility. Alternately,
you can double-click the print server in the Device List to
launch the Configuration Utility.
-
Factory Reset: Click this button to reload the factory settings
of the print server.
-
Discover Device: Click this button to search the connected
print server again.
-
About: Click this button to bring up a window containing the
basic information of PS-Utility.
-
Close: Click this button to exit PS-Utility.
3. Information Field: Display the basic information of the selected
print server in the Device List.
4. Status Bar: Display the system status.
- 17 -