Airmar LB150 - Manual (Page 69)

LB150 WeatherStation Technical Manual revision 0.013
Proprietary and Confidential
PRELIMINARY - DRAFT 66
_ NMEA 0183 RECEIVED SENTENCE _
$PAMTC,
SIM
Summary
Turn Simulate Mode On or Off.
Syntax
One of the following forms:
$PAMTC,SIM,0*hh<CR><LF>
Turn Simulate Mode Off
(default state).
$PAMTC,SIM,1*hh<CR><LF> Turn Simulate Mode On.
$PAMTC,SIM,Q*hh<CR><LF> Query Simulate state.
The $PAMTC,SIM,Q command provides a query function to allow reading the current
Simulate state. The reply to the $PAMTC,SIM,Q command is one of the following:
$PAMTR,SIM,0*hh<CR><LF>
Simulate Mode is Off
$PAMTR,SIM,1*hh<CR><LF> Simulate Mode is On
Notes
The Simulate Mode is not stored in EEPROM. On power up, the Simulate Mode
returns to the Off state.